Roofing panels
Cut to your rafter length in the colour and finish you pick, so panels run ridge to eave in one piece.
01 — Steel Roofing
Steel roofing,cut to your roof.
Panels, ridge, trim and closures for new builds, re-roofs and repairs — supplied across Northumberland County and the surrounding region.
A steel roof is the last roof most buildings need.
We supply the roof as a system, not just the panels: the sheets, the ridge cap, the eave and gable trim, the closures that keep weather and wasps out, and the fasteners that hold it all down. Panels are cut to your rafter length so there's no lap seam partway up the slope.
Bring your measurements, plans, a sketch on the back of an envelope, or a photo on your phone. We'll work out what you need from there.
On the shelf
What we supply.
Ridge & eave trim
The finishing pieces that cap the roof and close off the edges cleanly.
Flashing
Valleys, wall transitions, chimneys, vents — bent on our brake to suit the detail in front of you.
Closures & sealants
Foam closures, butyl tape and sealant so the profile seals properly at the ridge and eave.
Colour-matched fasteners
Screws and rivets in the same finish as the panel, so the roof reads clean from the ground.
Colours & finishes
Thirty finishes. One that's yours.
Glossy, textured and printed woodgrain — matched across roofing, siding and trim. Try one on a photo of your own house before you commit.
Out there
See all projects →Roofs we'd put our name on.
Good for
- New home and garage builds
- Re-roofing over an old shingle roof
- Barns, drive sheds and outbuildings
- Shops, storage and light commercial
- Patching or matching an existing steel roof
Questions we get asked
No. There's no minimum order. If you need three sheets and a length of ridge cap for a repair, that's a fine order.
Usually. Bring a photo, a colour name, or best of all an offcut of the existing panel and we'll work out the closest profile and finish we can supply.
In a lot of cases yes, depending on the condition of the deck and what's underneath. Talk it through with us or your installer before you order material.
We supply the material. Our roofing division, Moffatt Bros Roofing, handles installation, and we work with plenty of independent installers too.
Also from the shop
Tell us what you're building.
Bring measurements, a sketch, or a photo on your phone. We'll price the steel for it.